WPC Quarter round

Step 1

Leave a gap between the wall and 

the floor as suggested by the manufacturer 

of the floor, but no more than 1/2" to allow 

the molding to sit on the floor!

Step 2

Apply one thin bead of adhesive to the back of the 

Quarter Round  and attach it to the Wall Base Molding and support it with a heavy object until  the adhesive has cured so it wont pop off the Wall Base Molding

Step 3  Optional Step

Use finish nails in the Wall Base

Molding every 16”and also through the Quarter Round or Base Shoe and into the Wall Base Molding.Be sure to pre-drill all holes. Finish up the nails with a color matching Color Fill!