Availability: | |
---|---|
Quantity: | |
EH-TM4-KW005
Eco Home
category: Flooring trim
Product : T-molding with track
T-Moldings are commonly used in doorways to join two floors in adjoining rooms. Also recommended when making a transition from floor to another floor that is approximately the same height.
Surface Material: Wearlayer+decorative film
Core Material: PVC/WPC/SPC
Core Material | SPC |
Wearlayer | 0.1mm |
Product width(mm) | 45mm |
Product thickness(mm) | 6mm |
Product length(mm) | 2400mm/94" |
For flooring thickness | 4-6mm |
Residential Warranty in years | 5 |
Commercial Warranty in years | 2 |
Quantity per carton (pcs) | 25 |
Packing size (L*W*H) cm | 242*17*8.5 |
CBM per carton | 0.035CBM |
category: Flooring trim
Product : T-molding with track
T-Moldings are commonly used in doorways to join two floors in adjoining rooms. Also recommended when making a transition from floor to another floor that is approximately the same height.
Surface Material: Wearlayer+decorative film
Core Material: PVC/WPC/SPC
Core Material | SPC |
Wearlayer | 0.1mm |
Product width(mm) | 45mm |
Product thickness(mm) | 6mm |
Product length(mm) | 2400mm/94" |
For flooring thickness | 4-6mm |
Residential Warranty in years | 5 |
Commercial Warranty in years | 2 |
Quantity per carton (pcs) | 25 |
Packing size (L*W*H) cm | 242*17*8.5 |
CBM per carton | 0.035CBM |
Step 1
Install the flooring planks including the underlayment by
leaving a 1"-1.2” inch (25-30mm) gap for the installation
of the T-molding.
Step 2
Center the U-Track and Shim between the two laminate floors and screw them to the sub floor by using screws.
Step 3
Gently press the molding into the track starting from one end to the other just like you would close a Zip-Lock bag.1”!!! Do not try to push the entire molding in all at once
by just pressing it in from top !!!
Step 1
Install the flooring planks including the underlayment by
leaving a 1"-1.2” inch (25-30mm) gap for the installation
of the T-molding.
Step 2
Center the U-Track and Shim between the two laminate floors and screw them to the sub floor by using screws.
Step 3
Gently press the molding into the track starting from one end to the other just like you would close a Zip-Lock bag.1”!!! Do not try to push the entire molding in all at once
by just pressing it in from top !!!
0532-85732662, 85737007
+86-13808960522
sales@ecohinc.com
502 Zhonghuan Plaza No.19 Zhangzhou 2 Road, Qingdao China
Weishan Economic Development Zone, Jining, Shandong Province, China