Availability: | |
---|---|
Quantity: | |
EH-QR3-KW122475
Eco Home
Category: Flooring trims
Product : Quarter Round
Material: SPC/ Stone Plastic Composite
Quarter Rounds are used to conceal the required expansion space between the wall and the
laminate flooring. Available as Standard or Moisture Resistant.
Surface Material: wearlayer+decorative film
Core Material: PVC/WPC/SPC
Core Material | SPC |
Wearlayer | 0.1mm |
Product width(mm) | 28mm |
Product thickness(mm) | 15mm |
Product length(mm) | 2400mm/94" |
For flooring thickness | For all the thickness |
Residential Warranty in years | 5 |
Commercial Warranty in years | 2 |
Quantity per carton (pcs) | 25 |
Packing size (L*W*H) cm | 242*12.5*9cm |
CBM per carton | 0.027CBM |
Category: Flooring trims
Product : Quarter Round
Material: SPC/ Stone Plastic Composite
Quarter Rounds are used to conceal the required expansion space between the wall and the
laminate flooring. Available as Standard or Moisture Resistant.
Surface Material: wearlayer+decorative film
Core Material: PVC/WPC/SPC
Core Material | SPC |
Wearlayer | 0.1mm |
Product width(mm) | 28mm |
Product thickness(mm) | 15mm |
Product length(mm) | 2400mm/94" |
For flooring thickness | For all the thickness |
Residential Warranty in years | 5 |
Commercial Warranty in years | 2 |
Quantity per carton (pcs) | 25 |
Packing size (L*W*H) cm | 242*12.5*9cm |
CBM per carton | 0.027CBM |
Step 1
Leave a gap between the wall and
the floor as suggested by the manufacturer
of the floor, but no more than 1/2" to allow
the molding to sit on the floor!
Step 2
Apply one thin bead of adhesive to the back of the
Quarter Round and attach it to the Wall Base Molding and support it with a heavy object until the adhesive has cured so it wont pop off the Wall Base Molding
Step 3 Optional Step
Use finish nails in the Wall Base
Molding every 16”and also through the Quarter Round or Base Shoe and into the Wall Base Molding.Be sure to pre-drill all holes. Finish up the nails with a color matching Color Fill!
Step 1
Leave a gap between the wall and
the floor as suggested by the manufacturer
of the floor, but no more than 1/2" to allow
the molding to sit on the floor!
Step 2
Apply one thin bead of adhesive to the back of the
Quarter Round and attach it to the Wall Base Molding and support it with a heavy object until the adhesive has cured so it wont pop off the Wall Base Molding
Step 3 Optional Step
Use finish nails in the Wall Base
Molding every 16”and also through the Quarter Round or Base Shoe and into the Wall Base Molding.Be sure to pre-drill all holes. Finish up the nails with a color matching Color Fill!
0532-85732662, 85737007
+86-13808960522
sales@ecohinc.com
502 Zhonghuan Plaza No.19 Zhangzhou 2 Road, Qingdao China
Weishan Economic Development Zone, Jining, Shandong Province, China